Skip to content
Technical & Environmental Services

Measured on site. Costed in rupees. Ready for the certifier.

Energy, water and waste audits, LCA (life-cycle assessment), EIA / ESIA (environmental and social impact assessment) and ISO / IMS implementation — the engineering layer under every credible ESG claim.

Energy · Water · Waste audits LCA to ISO 14040 / 14044 EIA / ESIA impact assessment ISO / IMS implemented, not shelfware
The shift

Every ESG number traces back to a meter, a manifest or a permit.

Disclosure and strategy are only as good as the measurements under them — and the same measurements carry permits, costs and customer requirements. Three pressures land at once.

01 · THE PERMIT

Compliance is continuous.

Consents, discharge norms and environmental clearances do not pause between filings. Audits and impact assessments keep the operating licence current — and evidenced.

02 · THE COST LINE

Waste is paid for twice.

Energy, water and material losses show up in the P&L before they show up in any report. A proper audit finds where the money leaks — and ranks the fixes by payback.

03 · THE CUSTOMER

Buyers ask for the system.

Export customers and large buyers increasingly require certified management systems — ISO 14001, 45001, 9001 — and audit them. A certificate without a living system fails that audit.

What this is · what you get

From a walk of the plant to a certified, running system.

We measure on site, quantify what we find, and build the documentation and management systems that hold it — so the improvement survives the engagement.

01 · AUDIT

Measure on site

Energy, water and waste flows measured where they happen — meters, logs and mass balance, not estimates from a template.

02 · QUANTIFY

Rank the findings

Losses, gaps and impacts quantified and ranked — by cost, by compliance risk, by payback — into a punch-list you can budget.

03 · IMPLEMENT

Build the system

ISO / IMS documentation and implementation support that fits how the site actually works — written to be used, not shelved.

04 · VERIFY

Stand the scrutiny

Certification-ready systems and assessment reports with the evidence attached — for the certifier, the regulator or the customer audit.

Engineering-grade — and we show how

Every finding carries its measurement, its method and its payback.

The work is mastered against the technical standards that govern it:

ISO 14001 / 45001 / 9001 ISO 14040 / 44 · LCA EIA / ESIA IMS integrated systems
An audit that ends in adjectives is a site visit. Ours ends in quantities — what was measured, what it costs you, and what fixing it returns — so the decision is arithmetic, not faith.
◇ ILLUSTRATIVE MODEL — NOT A CLIENT RESULT

A typical audit engagement runs from site measurement to a ranked findings register and implementation plan within a defined audit window.

[ AUDITED SAVINGS & CERTIFICATIONS POPULATE HERE ONCE SUBSTANTIATED — WE DO NOT PUBLISH AN OUTCOME WE HAVE NOT VERIFIED. ]
SITE AUDIT · SAMPLETHE METHOD, NOT A CLAIM
FLOWS · METERED AT SOURCEMEASURED
FINDINGS · RANKED BY PAYBACKRANKED
SYSTEM · CERTIFICATION-READYREADY
RECONCILED TO THE MULTI-MARKET TRACK RECORD OF OUR PARENT PRACTICE, TERAVUE.
◇ THE REAL ECONOMY

The numbers live
on the plant floor.

Not in the template. Every credible figure starts at a meter, a weighbridge or a valve — which is where this work starts too.

Where you sit

Built for the people who run the site.

Operations & EHS leaders

Holding permits, consents and safety systems on a live site. We keep the compliance evidenced and the systems certifiable.

Request a Proposal →

Manufacturers & infrastructure

Energy- and resource-intensive operations where audit findings convert directly into operating savings.

Request a Proposal →

Exporters & suppliers

Facing customer audits and certification requirements to stay on the vendor panel. We build systems that pass them.

Request a Proposal →

Bring us the site.

Tell us the operation, the consents you hold and what is being asked of you. A specialist scopes a proposal — a real person, not a form receipt.

Common questions

Audits, LCA & management systems, briefly.

A measured account of where energy, water or material actually goes on your site, the losses and their cost, and a ranked register of fixes with indicative paybacks — evidence first, recommendations second.
A quantified assessment of a product's environmental impact across its life — raw materials, manufacture, use and end-of-life — carried out to the ISO 14040 / 14044 standards. Buyers increasingly ask for it behind "green" product claims.
An EIA assesses a proposed project's environmental impacts, typically for regulatory clearance. An ESIA extends the same discipline to social impacts — land, livelihoods, community health — which lenders aligned to IFC standards usually require.
An integrated management system runs quality, environment and occupational health & safety (e.g. ISO 9001, 14001, 45001) as one system instead of three parallel ones — one document set, one audit calendar, less duplication, and a system people actually use.